TAL-Mod v1.4.2 WiN MAC

Team R2R | 03.05.2019 | WiN: 5.4 MB | OSX: 15.3 MB

AAX, AU, VSTi, x86, x64

TAL-Mod is a virtual analog synthesizer with an exceptional sound and almost unlimited modulation possiblities. Its special oscillator model is able to create a wide range of sounds, from classic mono to rich stereo leads, effects and pads. Routings can be done with virtual patch cables. Just connect a modulation output with a modulation target. After that it’s possible to adjust the intensity of the modulation. You don’t need to be a modular expert. The plug-in is suitable for beginners and experts!

Features:
– 3 oscillators with optional saw, pulse, triangle and sine waveforms.
– 1 additional noise oscillator with adjustable color.
– 2 high quality analog sounding resonance filters with different modes (LP, HP, Notch, All Pass, BP).
– Different filter routing possiblities (parallel and serial). With the possiblity to choose the oscillator sources.
– Full stereo signal path.
– FM / RingMode support.
– 2 oscillators support hard sync for saw, pulse, triangle waveforms.
– Create stereo sounds and rich harmonics with additional oscillators (up to 7 sound generators per oscillator for osc I and osc II).
– 2 lfo’s with different waveforms, sync, trigger, unipolar modes and the possibility to modulate the rate.
– 3 adsr’s.
– Modulation envelope with spline or optional step mode. Trigger and host sync mode.
– Almost unlimited modulation possibilities with patch cable routing.
– Optional sequencer or arpeggiator.
– Basic effects: high pass filter, chorus, eq, reverb and delay.
– Mono and polyphonic mode.
– Microtuning support.
– Resizable UI.
– You choose your favorite UI colors.
– And a lot more…

Version History:

• Compatibility mode added for automation compatibility with version smaller 1.4.0 and reversed effect order (v 1.4.2)
• Bug fixes (v 1.4.2)
• Bug fixes (v 1.4.0)
• More resonance also at higher cutoff frequencies (v 1.4.0)
• Increased cutoff range (to make sure the filter is full open when cutoff at max) (v 1.4.0)
• Added some small amount of instability to the oscillators to get a more natural sound (v 1.4.0)

INFO/DEMO/BUY: http://mage.si/j5Sp
TAL-Mod v1.4.2 AAX AU VSTi x86 x64 WiN MAC-R2R
http://beelink.in/36413/TAL-Mod-v1.4.2-AAX-AU-VSTi-x86-x64-WiN-MAC-R2R.html

TAL-Sampler v2.8.0 WiN MAC

Team R2R | 03.05.2019 | WiN: 7.1 MB | OSX: 20.0 MB

AU, AAX*, VSTi, x86, x64

TAL-Sampler is not just a sample player. It’s a full featured analog modeled synthesizer with a sampler engine as sound source, including a powerful modulation matrix and a high quality self-oscillating 24/12/6 dB low pass filter. Don’t expect a 40GB piano sample library with samples for every velocity or something similar. The idea is to bring back the fun sampling was in the good old times with small samples, fast loading times and an intuitive work-flow to create your own sample presets without getting lost in the settings.

It’s possible to choose between different digital analog converters (DAC’s) to get the vintage sound of different hardware samplers inside your DAW. We don’t make cheap bit crushing or decimation on the output signal. We really down-sample the sample to the desired sampling frequency, then process the data depending on the chosen DAC and up-sample it to the desired pitch. Most DAC modes offer a LEVEL slider. This feature allows the user to reduce the volume of the recorded sample and decreases the sample quality. Load your favorite high quality sample and make it sound vintage and noisy. The 24dB low pass filter will like it!

Following diagram shows the signal flow if you choose the DAC Emu II mode:
The plug-in has four layers an can play four samples simultaneous. There is also a simple SFZ import for samples that imports the mapping and sample paths, but the plug-in also contains an easy to use mapping editor.

TAL-Sampler is available in the VST, Audio Unit and AAX plug-in format. You can load and play your own samples in every common sample format (*.wav, *.aiff, *.aif, *.mp3, *.ogg, *.flac). Import samples with drag & drop from finder or explorer. There is also an intuitive sample browser that helps to find samples fast.

Some nice additions like a vintage real-time time stretcher and the possibility to modulate or automate the sample loop positions.

Features

• Vintage DAC modes (Emu II, AM6070, Sample Hold).
• Steep 96dB low-pass reconstruction filter (Emu II and AM6070 F).
• Variable sample rate.
• Powerful MOD-Matrix.
• Four sample layers.
• Three AHDSR envelopes with vintage Digital / RC mode.
• Three LFO’s (Triangle, Saw, Rectangle, Random, Noise).
• High Quality effects (Reverb, EQ, Delay).
• Self resonating zero feedback delay filter (24/12/6 dB LP).
• Wide range of audio formats supported (*.wav, *.aiff, *.aif, *.mp3, *.ogg, *.flac).
• Scalable high resolution user interface.
• The possibility to change font and background colour.
• Fast sample and preset loading.
• More than 100 presets available as download (on the right).

———————————————————–

TAL-Sampler Version History:

• DAC Quality and ADC Quality options added (v 2.8.0)
• UI improvements (v 2.8.0)
• Bug fixes (v 2.8.0)
• Multi select in mapping editor (v 2.8.0)
• Improved SFZ preset browsing (v 2.6.1)
• Load SFZ does not update preset name fixed (v 2.6.0)
• Load SFZ files directly in the preset browser (by Load Button) (v 2.6.0)
• Copy / Paste layers with system clipboard added (v 2.6.0)
• Preset does not saved when selecting another preset in save dialog fixed (v 2.5.4)

INFO/DEMO/BUY: http://mage.si/a9Ww
TAL-Sampler v2.8.0 AU AAX VSTi WiN MAC-R2R
http://beelink.in/24292/TAL-Sampler-v2.8.0-AU-AAX-VSTi-WiN-MAC-R2R.html

RealGuitar v5.0.2 WiN

Team R2R | 03 May 2019 | 1.50 GB

APP/VSTi/VST3/AAX

If you are serious about creating truly realistic sounding solo and accompaniment guitar stuff for your songs, our product called RealGuitar is just what you need. RealGuitar is a sample-based virtual instrument with an innovative approach to guitar sound modeling and guitar part performing on keyboard. RealGuitar 5 is a combo of two instruments: Classic – all of our original guitar models with loads of new features, and Steel String – the debut of new guitar sample set with five patches and three tunings for each.

Version 5.0
Two instrument combo pack

• RealGuitar Classic – includes all of our original guitar models with loads of new playability features (fully backward compatible with RealGuitar 4)
• RealGuitar Steel String – features the debut of our new Steel String guitar sample set with five patches and three tuning selections for each

New steel string guitar sample set

• New high quality 24-bit stereo samples
• 6-string, 7-string, Baritone guitar tunings
• 12-string Standard and Baritone guitars
• 14-string Standard guitar
• Nashville Tuning for Standard and Baritone guitars
• Authentic, deep velocity response with controllable Buzz and Slap noises
• Up to 30 different samples for repeated notes
• Stereo, Mono, and Double output options
• Stop Slap, Stop Strum sound FX
• Palm Mute sound with tightness control

New multi performance mode

• Combining various guitar techniques (strumming, soloing, string picking, etc.) in a single performance layout
• 25 new Key Switch FX in chordal modes
• Velocity controllable number of strings in strummed chords
• Live control of solo and strum techniques
• Live control of chord inversions/positions
• Free voices leading in strummed chords
• Hammer-Ons and Pull-Offs in chords
• Slider (Bottleneck) guitar technique emulation
• Numerous performance options, effects, and their combinations

New usability features

• Advanced Velocity Curve control
• Hi quality Reverb FX
• Internal Loop in Song mode
• Use of DAW MIDI track to edit and play Pattern track
• Streamlined user interface for RealGuitar Steel String

INFO/DEMO/BUY: http://mage.si/3XrS
RealGuitar v5.0.2.7424 WiN MAC-R2R
http://beelink.in/34103/RealGuitar-v5.0.0.7424-WiN-MAC-R2R.html

RealStrat v5.0.2.7424 WiN

Team R2R | 03 May 2019 | 1.65 GB

STANDALONE/VSTi/VST3/AAX/x86/x64

The Fender Stratocaster(R) is and has always been the most popular electric guitar since its creation in 1954. Its unique sound is the favorite of many of the world’s finest guitarists and has been featured on countless historic recordings in all genres of music. RealStrat sample-based virtual instrument faithfully reproduces the Stratocaster(R) sound from both the sonic and playability perspectives. Our advanced technology gives its users the freedom to create everything from simple strumming techniques to the most sophisticated solos.

Version 5.0
Two instrument Combo Pack:
– RealStrat Standard – our original RealStrat model with loads of new playability features, fully backwards compatible to RealStrat previous version.
– RealStrat Elite – features the debut of our new sample set recorded from each of 3 Stratocaster pickups, having four patches and two tuning selections for each.

New RealStrat Elite guitar sample set:
– High quality 24-bit samples, recorded directly from Neck, Middle, and Bridge pickups individually.
– 7 realtime pickup selections giving you exciting tonal options.
– Double Track guitar patch.
– 6-string, 12-string guitars.
– Standard and Baritone tunings for all patches.
– Stop Slap sound effect added.
– Pinch Harmonics now produce 2-octave up initial pitches.

New Multi Performance mode:
– Combining various guitar techniques (strumming, soloing, string picking, etc.) in a single performance layout.
– 25 new Key Switch FX in chordal modes.
– Velocity controllable number of strings in strummed chords.
– Live control of solo and strum techniques.
– Live control of chord inversions/positions.
– Free voices leading in strummed chords.
– Hammer-Ons and Pull-Offs in chords.
-Slider (Bottleneck) guitar technique emulation.
– Numerous performance options, effects, and their combinations.

New Usability Features:
– Advanced Velocity Curve control.
– Internal Loop in Song mode.
– Use of DAW MIDI track to edit and play Pattern track of Song mode.
– Streamlined user interface for RealStrat Elite.
– Option to switch between black&white and color guitar background.

And more…

INFO/DEMO/BUY: http://mage.si/W94g
RealStrat v5.0.2.7424 WiN-R2R
https://thuglink.com/get/KPXhxSGBeV

LUXONIX Purity WiN MAC

TEAM AiR | 19.04.2011 | 111.4 MB

PURITY is a next generation of digital musical instrument workstation and PCM sound module software. PURITY is designed to realize and surpass the hardware musical instrument workstation perfectly on computer-based music production environments offering higher sound quality and more usability.

Enter the Next Generation.
PURITY is a next generation of digital musical instrument workstation and PCM sound module software. PURITY is designed to realize and surpass the hardware musical instrument workstation perfectly on computer-based music production environments offering higher sound quality and more usability.

Come to the Front.
PURITY provides rich sound sources to create professional music of any kind and any purpose. PURITY is based on well-sampled PCM wave data including a lot of sound of hardware workstations, sound modules, drum machines, vintage analog synths and even modern digital synths. Moreover, PURITY comes with over 1,300 ready-to-use sound presets that are most popular in each era of the electronic music. The integrated sequencer and the sequenced patches inspire your musical potential.

Forget Everything but Music.
PURITY makes you concentrate on your music without being annoyed about anything not related to music. Thanks to NAVIv2 engine and FOEM+, PURITY keeps the fame of the best software instrument with the lowest and most efficient CPU load and RAM usage. PURITY will be the one of your best musical tools which can effectively express the musical idea and feeling that you have.

16-part multi-instrument with GM Support

• – channel link function allows to layer sound patches
• – key/velocity range for splitting sound zone
• – General MIDI normal/rhythm sound and control support
• – 2 modes well-designed for each channel purpose – Melody/Drum

Integrated Mixer

• – realtime audio level meters
• – priority mode for arranging patches
• – 2 stereo output buses – main/sub
• – 2 stereo send-return effect buses – chorus/reverb
• – channel copy/paste/swap function
• – up to 1024-voice global polyphony (64 per channel)

Integrated Pattern Sequencer

• – innovative structure for melody and drum
• – up to 64 steps with 5 lanes
• – rate time option with triplet
• – swing option to vary time rate
• – latch function for background pattern

INFO/DEMO/BUY: http://mage.si/fJgX
LUXONIX Purity AU VSTi x86 WiN MAC-AiR
http://beelink.in/3755/LUXONIX-Purity-AU-VSTi-x86-WiN-MAC-AiR.html

LinPlug MorphoX v1.1.1 WiN

Team CHAOS | March 28 2014 | 11.08 MB

Don’t get stuck in complexity, with MorphoX you just need the modulation wheel and the keys to experience yet unheard expression and transformation in sound. Morphing made simple, in realtime, drastic changes in sound, right at your morph wheel. When you experience the sound sculptures of MorphoX you wont believe its just a quite simple subtractive synth with chorus, delay and an arpeggiator. Its dead easy to create your own morphing sounds.

Specification:

• the sound can be continuously morphed between two individual sounds including effects by just using the modulation wheel
• powerful yet easy to operate subtractive sound engine with many extraordinary modulation options
• Stereo Filter with simultaneous low pass, band pass and high pass and Filter FM
• Modulation Matrix including 10 routings, 20+ sources and 40+ destinations
• user programable 16 step Arpeggiator
• Microtonal support (TUN file import)
• Chorus and Stereo Delay effect units, fully morphing
• Sound programs are stored directly on hard disk
• Sounds are sorted into style-maps for easy search
• Integrated Sound Browser, MIDI program change supported.
• 32-voice polyphony, adjustable
• Adjustable Precision for recreating the warmth of analog synthesizers.
• MIDI Learn, settings can be saved / restored.

INFO/DEMO/BUY: DiSCONTiNUED
LinPlug MorphoX v1.1.1 VSTi x86 x64 WiN-CHAOS
http://beelink.in/13806/LinPlug-MorphoX-v1.1.1-VSTi-x86-x64-WiN-CHAOS.html

Chromium VA v1.0 VSTi x86 WiN

Team NEMESiS | 02/05/2006 | 2.39 MB

3 Oscillator synth with arpeggiator, double delay, stereo chorus and reverb.

Specs:
* 3 Oscillators with 7 waveforms, pulse width, FM and sync
* 1 ADSR Envelope
* 1 Multi Mode Filter with Envelope
* 1 LFO with multiple destinations
* 1 Modulator with multiple sources and destinations
* 1 FM Modulator with Envelope
* 1 Pitch Modulator Envelope
* 3 PW modulators
* 1 Phrase Areggiator
* 2 delays with pan
* 1 Stereo Chorus
* 1 Stereo Reverb
* 64 Patches with professional sounds

INFO/DEMO/BUY: DiSCONTiNUED
Angular Momentum Chromium VA v1.0 VSTi x86 WiN-NEMESiS
http://beelink.in/39366/Chromium-VA-v1.0-VSTi-x86-WiN-.html

EnvelopR v1.3 WiN MAC

TEAM R2R | 09.05.2019 | WiN: 8.6 MB | MAC: 12 MB

PLATFORMS: WiN32/64 – VST | MacOSX – AU/VST

Envelope Based Multi Effect.

It is designed to make sample accurate precision sidechain ducking, subtle multiband pannig movement, act as a monophonic quality filter for your synth plugin or whatever your creativity guides you to.

Features:
– Five sections with effects that can be turned on and off individually.
– Amp section, perfect for the sidechain ducking effect, always sample accurate.
– Amp multiband section, sidechain duck just the bass or have the sound moving.
– Filter section withseveral oversampled high quality filter types.
– Pan section with easy panoramic movements.
– Pan multiband section is the multiband version of pan.

INFO/DEMO/BUY: http://mage.si/L90D
EnvelopR v1.3 WiN MAC-R2R
https://thuglink.com/get/gBZEiPmwu5

Melodyne Studio 4 v4.2.1.003 MAC

PiTcHsHiFTeR | 09.05.2019 | 90.5 MB

STANDALONE/AU/VST/VST3/AAX/RTAS 32/64

Melodyne is a software application for OS X or Windows with which you can edit audio in a more musical way than was ever thought possible. In Melodyne, you work with notes – and not with a meaningless wave form. You don’t just see where the music gets louder or quieter but also where notes begin and end and at what pitch they lie. You can modify each note and thereby influence directly the intonation, phrasing and dynamics – and do this not only with vocals and monophonic instruments but with polyphonic instruments such as pianos and guitars as well. Working with Melodyne is like being able to say to a vocalist “sing this note a bit longer” or to a pianist “give slightly less weight to the third in this chord” – hours, weeks, even years after the recording session.

Melodyne 4 studio
The complete Melodyne. Melodyne 4 studio offers you all Melodyne functions for both correction and creative applications on an unlimited number of tracks. You can edit the sound and musical content of your recordings in such an intuitive manner or make such far-reaching changes with no other audio tool.

New technologies and a new degree of freedom for the entire Melodyne family. Celemony is releasing Version 4 of its legendary audio software Melodyne. This constitutes the most extensive update to the entire product family in the company’s history, with the emphasis on Melodyne 4 studio.

Highlights include the Sound Editor with its totally new sound design possibilities, DNA Direct Note Access – at last, on an unlimited number of tracks – and ultra-accurate tempo detection. Furthermore, Melodyne 4 studio now also runs directly as a plug-in within your DAW – also, naturally, in 64-bit resolution. The smaller Melodyne editions – editor, assistant and essential – have also been enhanced.

INFO/DEMO/BUY: http://mage.si/4MB0
Melodyne Studio 4 v4.2.1.003 MAC-PiTcHsHiFTeR
http://beelink.in/34129/Melodyne-Studio-4-v4.2.1.003-MAC.html

KONTAKT 6 v6.1.0 WiN MAC

P2P | 11 May 2019 | WiN: 561 MB | MAC: 1.02 GB

With KONTAKT 6, you can sound like a snare drum, a symphony orchestra, or anything in between, from a universe of sampled instruments. It’s a simple sampler when you want it to be, and a deep sonic scripting laboratory when you need something more. The next generation of the world’s favorite sampling platform gives you new instruments and new features under the hood – so you can layer, link, stretch, and shape your sounds any way you can imagine.

What’s new?
Over two decades, KONTAKT has become a highly-developed engine for creating and playing sampled instruments. KONTAKT 6 offers more for players and builders alike:
– Introducing KONTAKT Play Series: Three new instruments for the KONTAKT library, offering pristine, contemporary sound in a creative and streamlined interface
– Wavetable synthesis module: Build hybrid instruments for entirely new sounds
– Enhanced effects: Even more effects for your creations, for greater expression and realism
– Creator Tools: New standalone application dedicated to improving the library creation and editing process.

THREE NEW INSTRUMENTS
KONTAKT 6 introduces the KONTAKT Play Series: Sonically rich sample libraries that combine powerful sound design with simple playability. Each offers eight intelligently mapped macro knobs giving you a wide-sweeping, intuitive range of control. They all showcase KONTAKT’s new wavetable module, each offering two blendable sound sources and a unique take on a speciality style.

ANALOG DREAMS
Iconic 20th century hardware synthesizers captured with an intricate level of detail, and creatively processed with seminal outboard effects. This hybrid analog/digital instrument utilizes blendable sound sources to deliver a modern take on classic electro and synthwave, which have seen a resurgence in recent cinema.

ETHEREAL EARTH
Hybrid organic/electronic instrument that takes myriad acoustic instruments from around the world, and combines it with digital synthesis, organic foley layers, and effects processing. The result fuses traditional and digital, with basses, strings (bowed and plucked), wind instruments, tuned percussion, bells/metals, pads/drones, leads, and textural ambiences.

HYBRID KEYS
A contemporary, creative, and ultimately new take on keys and piano sounds. HYBRID KEYS moves away from conventional sampling processes and instead focuses on inventive techniques such as re-amping, creative mic positioning in interesting spaces, and vari-speed experiments with tape.

NEW FEATURES FOR BUILDERS
KONTAKT has long since grown beyond its origins as a software sampler, and now provides a solid foundation for building advanced sample-based instruments. We’ve been supporting this platform, and the people who use it, with continuous updates to KONTAKT 5, and KONTAKT 6 builds on this strategy with some big additions for you builders out there.

NEW EFFECTS
– Replika Delay: Based on the dedicated Native Instruments plug-in REPLIKA XT, it offers multiple delay modes, each with a vastly different sound character.
– Room Reverb: A new high-quality algorithmic room reverb that offers options for real time modulation.
– Hall Reverb: Another high-quality algorithmic reverb, tuned for hall sounds.
– Plate Reverb: Emulates a plate reverberator for for classic vintage metallic sounds.
– Cry Wah: Wah-wah effect module, based on the most popular wah pedal of all time.

WAVETABLE MODULE
The latest version of KONTAKT adds wavetable synthesis to the ever expanding KONTAKT toolset. All three of the new Play Series instruments incorporate this new module, and we’re looking forward to hearing what you create with this powerful new building block.

CREATOR TOOLS
Creator Tools is a standalone application designed to improve the workflows of library builders and instrument creators. It consists of two elements: A Debugger, for identifying and fixing problems in KONTAKT script, and an Instrument Editor, which can load and run Lua scripts to automap samples, duplicate and batch rename groups, and copy settings from one part of an instrument to another.

Kontakt 6.1.0 – 2019-05-08
– ADDED There is a new wavetable mode (Inharmonic) that stretches the partials away from the harmonic series for more bell-like tones
– ADDED KSP: Kontakt can now import whole performance views as NCKP files (that can be made with Creator Tools) through the new load_performance_view() command
– ADDED KSP: A new UI control container has been added (ui_panel)
– ADDED Kontakt now automatically picks up changes in the following subfolders of the resource container: scripts & performance_view; editing and saving any of those files results in an instant – update of the related Kontakt instrument without the need to reset the engine via the panic (!) button in the header
– ADDED KSP: The Retrigger button on modulators can now be controlled via KSP ($CONTROL_PAR_INTMOD_RETRIGGER)
– ADDED KSP: The waveform display now has two new drawing modes ($CONTROL_PAR_WF_VIS_MODE, with $NI_WF_VIS_MODE_1, $NI_WF_VIS_MODE_2 & $NI_WF_VIS_MODE_3 as potential values)
– FIXED Slices from imported REX files would not be recognized
– FIXED The labels for the Lo Shelf and Hi Damp controls in the Plate Reverb were inverted
– FIXED KSP: There were some missing getters for newly added control parameters around custom fonts (e.g. $CONTROL_PAR_FONT_TYPE_ON_HOVER)
– FIXED KSP: There were some missing getters for $CONTROL_PAR_TEXT for certain controls
– FIXED Zone volume changes from the Creator Tools Instrument Editor were not predictable when higher values were used
– FIXED Sorting of files in the Library tab wouldn’t be predictable on APFS disks
– FIXED KSP: search() would not work on ui_tables
– FIXED Host automation would break for ui_switch elements in many cases
– FIXED It was possible to set the delay time for Replika to values that would cause instabilities
– FIXED Kontakt would crash when loading certain 3rd party products (like those in the Shreddage 3 series)
– FIXED Kontakt would crash or hang when attempting to change note mapping on GGD Matt Halpern Signature Pack
– FIXED The wavetable oscillator would sound “darker” on certain pitches
– FIXED KSP: Color settings for level meters would not take effect if applied outside the init callback
– FIXED KSP: The hide state of ui_file_selector appeared to be wrong when queried via get_control_par()
– FIXED The group source mode parameter is no longer saved in snapshots; snapshots saved with older versions are recalled as they always did
– FIXED Kontakt would crash when pressing the End key in the File Browser (Windows only)
– FIXED KSP: In certain cases, the wavetable display UI widget would not be displayed on first load of an instrument
– KNOWN ISSUE KSP: In certain cases, the ui_file_selector element reverts to its base path, forgetting the last selected file

Creator Tools 1.1.0:
– ADDED GUI Designer: A new tool that enables the declaration and editing of full performance views without the need to write KSP
– ADDED GUI Designer: Individual controls can be exported and imported for cross-project use
– ADDED GUI Designer: A test instrument can now be found in the Factory Content folder next to the Creator Tools application
– ADDED GUI Designer: The new engine parameter for the waveform display (drawing mode) is now also available here
– ADDED Error messages are now more informative
– ADDED GUI Designer: It is now possible to drag and drop NCKP files from the OS to the GUI Designer to open them
– ADDED Instrument Editor: It is now possible to drag and drop LUA files from the OS to the Instrument Editor to open them
– ADDED All info boxes and context menus now include key shortcuts where relevant
– CHANGED The Quick Tour is now updated to reflect the changes in v1.1.0

INFO/DEMO/BUY: http://mage.si/4Bw1
KONTAKT 6 v6.1.0 WiN MAC
http://beelink.in/37543/Kontakt-6-v6.1.0-WiN-MAC.html

V-Station v2.6 WiN MAC

Team R2R | May 11 2019 | WiN: 6.3 MB | OSX: 6.1 MB

PLATFORM : WiN32/64 – VSTi | MacOSX – AU/VSTi

The V-Station is a polyphonic soft-synth for Mac and PC. It has the same real 3-oscillator flexibility as the award winning K-Station, with powerful filters, 8-voice polyphony, simultaneous Novation FX. Programming V-Station is simple. All the primary controls are on the main screen. Recall a named factory preset, tweak it and instantly save it in any of the 400 program locations. You’ll find additional functions and controls on three further tabs.

Novation Virtual Synthesis

Industry-standard VSTi and Mac OSX Audio Unit plug-in format.

Analogue Sound Modelling
Digital-analogue sound based on K-Station sound engine.

Arpeggiator with Sync-Lock
Play rhythmical patterns in sync with an incoming MIDI clock.

Simultaneous Effects
Including reverb, chorus, phaser, delay, panning, distortion and EQ.

Novation Synth Engine
Powerful 3-oscillator sound engine with noise and FM capability.

Presets
400 user programs and 200 factory presets provide a huge array of instant sounds.

Changelog:
– Fixed issues where master volume might not be saved with the DAW project.
Note: settings saved with this version of the plug-in will not be compatible with previous versions of the plug-in.

INFO/DEMO/BUY: http://mage.si/bAP5
V-Station v2.6 AU VSTi x86 x64 WiN MAC-R2R
http://beelink.in/17949/V-Station-v2.6-AU-VSTi-x86-x64-WiN-MAC-R2R.html

Synth Collection 2019.5 WiN

TEAM V.R | 25.05.2019 | 1.89 GB

(Win64; AAX, VST3, VSTi, STANDALONE)

One installer for:
– ARP 2600 V3 v3.4.1
– Buchla Easel V v1.4.1
– CMI V v1.4.1
– CS-80 V3 v3.4.1
– CZ V v1.0.1
– DX7 V v1.4.1
– Jup-8 V3 v3.4.1
– Matrix-12 V2 v2.4.1
– Mini V3 v3.4.1
– Modular V3 v3.4.1
– Pigments v1.1.2
– Prophet V3 v3.4.1
– SEM V2 v2.4.1
– Synclavier V v2.4.1
– Synthi V v1.0.1

Whats New:
Improvements:
– Playlist edition improvements
– Playlist preset naming improvements
– Favorite presets management improvements
– Preset naming improvements
– Preset search improvements

Bug fixes:
– Playlists now visible after recalling a project
– No more crash when browsing presets
– No more crashes when naming preset
– Favorite presets now properly sorted when shuffle is enabled
– Links to FAQ now available
– Playlists are now visible after uninstalling/reinstalling an instrument

INFO/DEMO/BUY: http://mage.si/4D5j
Synth Collection 2019.5 WiN CSE-V.R
https://thuglink.com/get/aplCTvNoYx

Piano & Keyboards Collection 2019.5 WiN

TEAM V.R | 25.05.2019 | 2.40 GB

(Win64; AAX, VST3, VSTi, STANDALONE)

One installer for:
– B-3 V2 v2.0.2
– Clavinet V v1.4.1
– Farfisa V v1.4.1
– Mellotron V v1.0.1
– Piano V2 v2.4.1
– Solina V2 v2.4.1
– Stage-73 V v1.4.1
– VOX Continental V2 v2.4.1
– Wurli V2 v2.4.1

Whats New:
Improvements:
– Playlist edition improvements
– Playlist preset naming improvements
– Favorite presets management improvements
– Preset naming improvements
– Preset search improvements

Bug fixes:
– Playlists now visible after recalling a project
– No more crash when browsing presets
– No more crashes when naming preset
– Favorite presets now properly sorted when shuffle is enabled
– Links to FAQ now available
– Playlists are now visible after uninstalling/reinstalling an instrument

INFO/DEMO/BUY: http://mage.si/4D5j
Piano and Keyboards Collection 2019.5 WiN CSE-V.R
https://thuglink.com/get/yVOpkIB78k

FXPansion VST to AU Adapter v2.0 MAC

Team DYNAMiCS | 01.27.2007 | 5.69 MB

The VST to AudioUnit Adapter for Mac OSX is a highly-integrated plug-in wrapper that allows users of AudioUnit-compatible applications to integrate VST plug-ins and instruments seamlessly into their working environment. VST to AU Adapter v2.0 seamlessly and transparently converts your VST plug-ins to Apple Audio Units, and offers full compatibility with the latest versions of Mac OS X and the VST and AU specifications. The adapter uses virtually no CPU power or memory and makes a vast range of free and commercial VST plug-ins (over 1,000 available at the last count) available directly within your Audio Units host applications, exactly as if they were native AU plug-ins. It’s incredibly easy to use, and available as an instant download from our on-line store.

Compatibility
VST to AU Adapter and Mac OSX 10.7 and 10.8
For the adapter to work in 10.7 and 10.8, it is necessary to set permissions on the /Library/Application Support folder so that it is possible to read and write its contents. If it is read-only (this is the default on 10.7 and 10.8), the adapter cannot function.

General compatibility
The current compatibility status of the adapter is that it works for VST2.3 plugins and many VST2.4 plugins.
In cases of incompatibility, it is possible for the plugin vendor to update their software for compatibility with the adapter with minimal effort.
The Adapter supports all VST2 features such as sample-accurate timing, parameter automation, automatic tempo synchronization, easy preset browsing and FXB/FXP support.

VST Support
All VST 2.3 plugins are supported, while many VST 2.4 plugins also function. Some VST 2.4 plugins are not compatible – it is possible for the plugin vendor to update their software for compatibility with minimal effort.

The following situations are supported:

• “OS X Carbon” and “OS X Mach-O” VST plug-ins on OS X / PPC
• Windows VST plug-ins on Windows
• “OS X Intel” plug-ins on OS X / x86.

The following situations are not supported:

• Mac OS 9 VST plugins – the VST plugins must be written for Windows XP (or later) for Windows operation or Mac OSX 10.4.x (or later) for Mac operation
• Mac PowerPC-only plugins (non-universal binary) on Macs with Intel CPUs
• Mac Intel-only plugins (non-universal binary) on PowerPC Macs

Important notes:

• The Adapter cannot convert AU plugins to VST format
• The Adapter cannot allow you to use Windows plugins on a Mac
• The Adapter cannot allow you to use Mac plugins on a Windows PC

INFO/DEMO/BUY: http://mage.si/eMTh
FXPansion VST to AU Adapter v2.0 MAC OSX UB-DYNAMiCS
http://beelink.in/3460/FXPansion-VST-to-AU-Adapter-v2.0-MAC-OSX-UB.html

FXPansion VST to RTAS Adapter v2.1.1 WiN MAC

Team AMPLiFY | 11.11.2007 | 13.54 MB

Version 2 of our award winning VST to RTAS Adapter is the easiest and best way to enable your VST effects plugins and VST Instruments in Pro Tools 7.x and 8.x TDM, LE and M-Powered. VST to RTAS Adapter seamlessly and transparently integrates your VST plug-ins in to Pro Tools, and offers full compatibility with the VST plug-in standard and Pro Tools 7.x and 8.x. The adapter uses virtually no CPU power or memory and makes a vast range of free and commercial VST plug-ins (over 1,000 available at the last count) available directly within Pro Tools, exactly as if they were native RTAS plug-ins. It’s incredibly easy to use, and available at an affordable price as a direct, instant download from our on-line store.

Compatibility
Supported Pro Tools versions

• Pro Tools 7.x, 8.x (M-powered, LE and TDM systems)
• Pro Tools 9.x
• Pro Tools 10.x

Pro Tools 6.x users
It is possible to use v1.x of the adapter for Pro Tools 6.x. Purchasers of v2.x also receive access to v1.x.

VST to RTAS Adapter and Mac OSX 10.7 and 10.8
For the adapter to work in 10.7 and 10.8, it is necessary to set permissions on the /Library/Application Support folder so that it is possible to read and write its contents. If it is read-only (this is the default on 10.7 and 10.8), the adapter cannot function.

General compatibility
The current compatibility status of the adapter is that it works for VST2.3 plugins and many VST2.4 plugins. In cases of incompatibility, it is possible for the plugin vendor to update their software for compatibility with the adapter with minimal effort. The Adapter supports all VST2 features such as sample-accurate timing, parameter automation, automatic tempo synchronization, easy preset browsing and FXB/FXP support.

VST Support
All VST 2.3 plugins are supported, while many VST 2.4 plugins also function. In cases of incompatibility, it is possible for the plugin vendor to update their software for compatibility with the adapter with minimal effort.

The following situations are supported:

• “OS X Carbon” and “OS X Mach-O” VST plug-ins on OS X / PPC
• Windows VST plug-ins on Windows
• “OS X Intel” plug-ins on OS X / x86.

The following situations are not supported:

• Mac OS 9 VST plugins – the VST plugins must be written for Windows XP (or later) for Windows operation or Mac OSX 10.4.x (or later) for Mac operation
• Mac PowerPC-only plugins (non-universal binary) on Macs with Intel CPUs
• Mac Intel-only plugins (non-universal binary) on PowerPC Macs

Important notes:

• The Adapter cannot convert RTAS plugins to VST format
• The Adapter cannot allow you to use Windows plugins on a Mac
• The Adapter cannot allow you to use Mac plugins on a Windows PC

INFO/DEMO/BUY: http://mage.si/wk9c
FXPansion VST to RTAS Adapter v2.1.1 WiN MAC OSX UB PPC-AMPLiFY
http://beelink.in/3459/-FXPansion-VST-to-RTAS-Adapter-v2.1.1-WIN-MAC.html

U-he Hive v2.0.0.8676 WiN

Team V.R | 28 May 2019 | 161 MB

(Win32/64; AAX*, VST3, VSTi)

Hive: lightweight synth, heavyweight sound Sleek, streamlined and super fast. Hive was built for speed. An effortless workflow, low cpu use and a single page interface means you can build your tracks in no time. Being ‘fast and simple’ does not mean sacrificing sound quality or creative control. Hive is packed with features, controls and enough flexibility to deliver stunning sounds. A lightweight synth with a heavyweight sound.

Features:

• CPU-friendly VA synthesizer
• Single page design
• Each panel offers presets in a drop-down menu
• Solo buttons for each oscillator and filter panel
• Skinnable UI
• Over 2700 factory presets
• 3 different synth engine characters
• 2 pairs of stereo oscillators and sub-oscillators with 9 different waveforms each
• Polyphonic (up to 16 voices), duophonic, mono and legato modes
• Up to 16× unison per oscillator
• 2 multimode filters: lowpass, highpass, bandpass, bandreject or peaking
• Flexible oscillator and filter routing
• Common clock for arpeggiator and sequencer, with strict host-sync option
• 2 LFOs with various shapes, sync options and unipolar switch
• Extra vibrato oscillator
• 2 pairs of ADSR envelopes, each stage can be individually modulated
• Glide control, constant rate or constant time mode
• 12-slot modulation matrix with 2 targets per slot, countless targets including all FX parameters
• Drag and drop modulation assignment
• 7 quality effects on board: distortion, chorus, delay, phaser, EQ, plate reverb, compressor
• On-screen keyboard
• Resizable UI from 70% to 200%
• Arpeggiator with direction, order, octave and frame/restart controls
• 16-step sequencer to drive notes or modulation
• MIDI learn page and editable list
• Global preferences page

Changes in version Hive 2.0 (revision 8676):
Release Notes:
New features and improvements:
– 378 new presets
– More wavetables
– NKS-ready
– New GUI
– Shape Sequencer
– Function Generators
– Scope
– Key Quantizer (play custom scales)
– XY section expanded
– New mod matrix modifier: Sample & Hold
– More quantization options in mod matrix
– New Seq Mod modulation source
– Mod Assigners for visual feedback of assigned modulations
– Modulation overview/unassignment via right-click on parameters
– Newly added presets now easily findable through saved search entry

Fixed:
– Unwanted clicks on note attacks
– Compressor parameters smoothed to avoid zipper noise
– Selecting init preset does not switch folder selection anymore
– Modulating clock swing could cause unexpected results
– Clock swing could delay the first note
– Strict host sync could cause too early or cut off notes
– Rare crash when trying to reopen a host project fixed
– “Create New” and “Rename” dialogs sometimes not working (Windows only)
– Improved mouse drag sensitivity for Ctrl A/B selection on MIDI table page
– Sustain pedal now working according to standard (0-63 = off, 64-127 = on)
– Improved sustain pedal behaviour when playing same note repeatedly
– VST3 was reporting only one MIDI channel to the host
– Ctrl A/B now working correctly in VST3 version
– MIDI learn now working in VST3

Known Issues:
– Wavetables not loaded if they contain special characters (Windows only)
– Tracktion only – Issue with VST3 and arp/host sync (use VST2 instead)

INFO/DEMO/BUY: http://mage.si/thqU
U-he Hive v2.0.0.8676 AAX VSTi VST3 x86 x64 WiN CE-V.R
http://beelink.in/36836/U-he-Hive-v2.0.0.8676-WiN-CE-V.R.html

Quanta v1.1.0 WiN MAC RETAiL

SYNTHiC4TE | May 30 2019 | 23 MB

AAX AU VSTi VST3 x86 x64

Quanta, a new Granular Synthesizer plug-in for macOS and Windows (with an iOS version coming soon)

Feature Highlights:
Granulate!
Quanta is a full-featured ten-voice true stereo granular synthesizer, with up to a hundred 1000ms grains per voice, and full control over the grain state, with direct randomization and modulation of most parameters. Drag-and-drop a sample (WAV, AIFF, Ogg, or FLAC) on to the window and go to work.

Synthesize!
With two multi-mode filters (with LP, HP, BP and notch in 2-pole and 4-pole topologies), and a “sidecar” virtual-analog oscillator and noise generator that can be used in addition to, or injected into, the grain engine, Quanta is a fully capable subtractive synth in its own right, and will work as a granular or subtractive (or both) synth without any sample at all.

Modulate!
Quanta has mod coming out its ears. First up are four of our new FEGs (Flexible Envelope Generator), a 99-point looping function generator with optional host tempo sync. Then add two arbitrary-waveshape LFOs, a multi-source sample-and-hold module, and fully user-controllable MIDI assignments, with nearly every control on the panel as a destination.

Control!
Quanta is customizable to your taste and playing style. With full MPE support, it can take advantage of the extended control set of your Linnstrument, Seaboard, Soundplane, Continuum, or other MPE controller, and support for TUN files lets you use tuning tables. The resizable Hi-DPI GUI lets you adjust the size to match your visual needs, and the cross-platform preset mechanism lets you share your creations with your friends and collaborators, no matter what system they are using.

CHANGES IN v1.1.0:
> The synth has been updated to version 1.1, with changes including a huge reduction in “clicking” from voice stealing, usability and UI updates, and many small bug fixes.

INFO/DEMO/BUY: http://mage.si/y3KG
Quanta v1.1.0 WiN MAC RETAiL-SYNTHiC4TE
http://beelink.in/36951/Quanta-v1.1.0-WiN-MAC-RETAiL.html

Reaktor v6.3.1 UNLOCKED MAC

P2P | 30 May 2019 | 191 MB

Modular DSP Lab

Build custom synths, samplers, effects, and sound design tools Experiment with rack-style modular patching using Blocks Discover 70+ included instruments plus thousands of sounds in the User Library TRUE SONIC PLAYGROUND REAKTOR 6 is the ultimate creative toolkit for deep sound exploration, featuring cutting-edge DSP and high-fidelity sound. WHAT’S NEW: REAKTOR 6 makes advanced sonic experimentation more accessible than ever. Primary and Core Macro libraries are refined for ease of use with new categories and intuitive folder structure. Workflows are now more efficient thanks to a modernized interface, improved structure editing, and a revised property and navigation. Plus, new features like Table Framework, Bundles, and Scoped Buses unlock a new level of power to REAKTOR builders.

INTRODUCING BLOCKS
Blocks is a new framework that turns REAKTOR 6 into a fully-equipped, rack-style modular synth. Over 30 Blocks – including oscillators, filters, effects, modulators, and sequencers – come with REAKTOR 6. Among these Blocks are components from acclaimed NI synths such as ROUNDS and MONARK – all you need to start creating elaborate modular synth patches.

UNRIVALLED SOUND QUALITY
REAKTOR’s trademark sound quality is unmistakable. From anti-aliased oscillators and ZDF (zero delay feedback) filters to granular synthesis engines, a team of leading developers build every component in REAKTOR from the core level up using the most elegant algorithms. Their relentless pursuit of DSP excellence keeps this sonic toolkit at the head of its class. And everything inside is organized for immediate use in REAKTOR’s macro libraries for fast, creative building sessions.

FOR SOUND MAKERS OF ALL LEVELS
Newcomers can quickly start playing with over 70 REAKTOR Factory instruments, each loaded with presets to get you started. Or download one of over 4,000 free instruments created by the REAKTOR user community. Once the REAKTOR environment becomes familiar, patching with Blocks unlocks a world of on-the-fly sonic experimentation. And for those who want to dig deeper into the creative process, REAKTOR lets you build complete instruments from the ground up.

JOIN THE REAKTOR COMMUNITY
The REAKTOR community unites thousands of artists, sound designers, and instrument builders at all skill levels passionate about sound and instrument design. Discover the latest additions to the user library, upload your own creations, discuss new tips and tricks in the learning section, and be a part of a highly innovative and dedicated community of builders committed to advancing the future of sound.

READY FOR KONTROL
Control REAKTOR directly from a KOMPLETE KONTROL S-Series keyboard or MASCHINE. With the REAKTOR API, you can design fully-integrated performance setups. Create your own touch strip integration, custom displays, parameter mappings, light guide configurations, and more. Hybrid software/hardware instruments that are a true evolution in instrument design.

POWERED BY REAKTOR
REAKTOR is the technology platform behind some of NI’s most acclaimed instruments and effects like RAZOR and MONARK, TRAKTOR’s built-in effects, and the MASCHINE 2 Drum Synths. Discover the full extent of REAKTOR’s capabilities with these advanced products – all powered by REAKTOR.

6.3.1 – 2019-05-28:
•FIXED Midi FX in AU format
•FIXED Behaviour when opening an Ensemble file via double click on Windows
•FIXED Issue when loading snapshot banks created with an older version of Reaktor

INFO/DEMO/BUY: http://mage.si/JAK5
Reaktor 6 v6.3.1 AU VST STANDALONE 64Bit MAC OSX
http://beelink.in/23778/Reaktor-6-v6.3.1-AU-VST-STANDALONE-64Bit-MAC-OSX.html

Endless Series v3.00 VSTi WiN

Team ASSiGN | 28 MAY 2011 | 3.30 MB

Endless Series is a unique synthesis and effect plug-in based on the Shepard Tone auditory illusion. It generates mind bending infinite scales, psychedelic drones and fascinating sonic textures and works as a tone generator, a ring modulator, phaser, flanger or resonant filter bank effect. It’s perfect for adding subtle or extreme tension to many kinds of electronic and experimental music – for instance you can use it to drive the dance-floor crazy with never ending build-ups and climaxes, or add a sense of motion to your latest track without changing the tempo. The plugin is also very effective for many sound design tasks and makes great high-octane engine sounds, like those used for the Batpod in Batman, The Dark Knight.

Features:
– Additive Tone generator with up to 40 partials.
– Circular-pitch ring modulator, flanger, filter and phaser effects.
– Glissando, stepped and MIDI-stepped control modes.
– MIDI-stepped mode allows for synchronising to tempo etc.
– Lots of options for changing the partial spacing and creating harmonic or inharmonic timbres.
– True stereo operation, mono & mono2stereo for all FX modes.
– Stereo detune/fattening and Auto-panning effects.
– Quantise stepped modes to one of 14 different scales.
– Control harmonics of each partial for a richer sound.
– Distortion and noise modulation for partials, for a dirtier sound.
– Integrated preset/bank management for compatibility across hosts/platforms.
– Integrated help system.
– Massive sonic-potential.

INFO/DEMO/BUY: http://mage.si/00NY
Endless Series v3.00 VSTi WiN x86 x64-ASSiGN
http://beelink.in/39398/Endless-Series-v3.00-VSTi-WiN-x86-x64-ASSiGN.html

Pigments v1.2.0.594 WiN x64

Team V.R | 14 June 2019 | 124 MB

(Win64; AAX, VST3, VSTi, STANDALONE)

Pigments, a hybrid “polychrome” instrument that features hugely powerful, cutting-edge wavetable synthesis alongside award-winning virtual analog technology. After spending 20 years analyzing and emulating the best synthesizers ever made, they have now used their expertise to create an original, uniquely software synthesizer. Pigments offers exceptional sound thanks to its hugely powerful architecture and lightning-fast workflow that makes complex modulations easy, fast, and fun.

Pigments has some colorful tricks up its sleeve. In fact, it can do things other synthesizers simply cannot do. These include:
•Scale quantized pitch modulations to build complex melodic sequences.
•Continuous unison controls that can be modulated, with classic and chord modes.
•Extensive waveshaping options for the wavetable oscillator, with great aliasing control.
•The usual modulation sources and some more unconventional ones like the Turing and Binary random generators.
•Powerful gate/retrig handling for modulators. Perfect to inspire unusual rhythmic sequences or self-generating patches.
•Polyrhythmic sequencer with a strong emphasis on randomness, with scale control to remain musical.

At a glance, here are its key features:
•Two engines in parallel: the best of both worlds
•Virtual Analog triple oscillator engine.
•Complex Wavetable engine with morphing and import.
•Twin filters: dozens to choose from
•Classic filters from V Collection instruments.
•Modern filters like surgeon and comb.
•Continuous series/parallel routing.
•Powerful effects section: an all-in-one solution
•13 stunning effects, including wavefolder, overdrive, parametric EQ, and delay.
•Insert or Send routing options with drag and drop for easy switching.
•All the essential parameters can be modulated.
•Advanced modulation system: modulate anything with anything
•Graphical editing, source-based or destination-based.
•Envelopes, LFOs, Function generators, Random sources.
•4 assignable Macros to control multiple parameters at once.
•Visual interface: understand your sound
•Graphical representation of the most important modules.
•Living, moving waveform to see your sound come alive.
•Polyrhythmic Sequencer and Arpeggiator: get creative
•Create complex, custom and evolving sequences or arps.
•Extensive factory preset library: learn from the masters
•Hundreds of presets from awesome artists and experienced sound designers, including Jeremy Savage, Starcadian, Cubic Spline, Mord Fustang, and Jörg Hüttner.
•Highlighted “notes” to show which parameters are recommended to tweak.

v1.2.0.594:
New Features:
– NKS compatibilty
– 53 new presets – type 1.2 in search bar to find them
– Added preset store – some packs already available
– Sharper envelope attack times now accessible
– Added Supersaw unison mode for a classic trance feel
– Added aftertouch response curve
– Microtuning (.scl and .tun) support
– Added a third Combinate slot
– Added Remap mode in Combinate – transform a modulator with a remapping function
– Independent clock divisor for each sequencer lane (Pitch, Octave, Velocity, …)
– Reworked Sequencer graphics
– Modulation bar now highlights which modulator is being edited when hovering
– New tutorial about filters – accessible from the toolbar drop-down menu
– LFO Phase tool tip now shown in degrees
– Minor graphical improvements

Bugfixes:
– Wavetable oscillator 3D viewer now shows the right wave when morph is OFF
– Some sound designer images and bio were missing, now properly displayed
– “+” button for styles can’t be added as a style anymore
– Panic now properly received from external controllers
– Sidechain modulation now appears when side chain value is set to -1
– Graphical refinements and typos in tutorials and tooltips
– With some graphic cards, wavetable 3D display would not show up properly, now fixed
– Factory wavetables are not exported anymore when exporting a bank

INFO/DEMO/BUY: http://mage.si/7syV
Pigments v1.2.0.594 WiN REv.2 CSE-V.R
http://beelink.in/38196/Pigments-v1.2.0.594-WiN-CSE-V.R.html